M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Manual de usuario descargar pdf (Pagina 14)

APPENDIX 4

Controls for the  rst EQ plug-in on that track are then assigned to the rotary

encoders and displayed in the Channel Scribble Strips and switched controls,

such as Master Bypass or Phase Invert functions, can be controlled using the

Channel Select switches.

If you have more than one EQ plug-in inserted on a track, you can get to the

second by holding the EQ button and pressing the track’s Channel Select

button. The controls will then be displayed on the Channel Scribble Strips, and

if the  rst EQ plug-in’s window is open in Pro Tools, the window will switch to

the second EQ plug-in.

Dynamics

When you press the Dynamics switch, the Channel Select buttons will light up

on any channels that have dynamics plug-ins (such as compressors or limiters)

inserted so that you can identify these.

Choose the one you want to work with by pressing its Channel Select button.

Controls for the  rst Dynamics plug-in on that track are assigned to the rotary

encoders and displayed in the Channel Scribble Strips. Switched controls, such

as Phase Invert or In/Out for EQ bands, can be controlled using the Channel

Select switches below the corresponding Scribble Strips. Again, if you have

more than one Dynamics plug-in inserted on a track, you can get to the

second by holding the Dynamics button and pressing the track’s Channel

Select button.

Inserts

When you press the Inserts switch, the Channel Scribble Strips will show

abbreviated names for any inserts on the track, and the Channel Select buttons

will light up on any channels that have a plug-in (or any hardware I/O) inserted

so that you can identify these.

You should check the Display Scribble Strips at this point to see which of

the  ve insert slots you are viewing in the Channel Scribble Strips. These are

labeled A to F and you can select which to view using the Insert/Send Position

Selectors at the middle left of the control surface.

You can choose which insert to edit by viewing each of the five insert

slots in turn until you  nd the insert you are looking for, then pressing the

corresponding illuminated Channel Select button.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 52 53

Sin comentarios

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Manual de usuario Pagina 14