M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Manual de usuario descargar pdf (Pagina 9)

Hardware options for Pro Tools LE and M-Powered systems

and line level. The second button switches in a high-pass  lter (HPF). This  lter

removes the lower frequencies that may contain rumble or other unwanted

sounds.

Figure A4.5

Digi 002 top section.

Figure A4.6

Digi 002 middle

section.

To the right of these there are two small button switches. The  rst of these

routes the Alternative Source to input pair 7–8. The second routes the

Alternative Source to the monitor outputs. An associated rotary control knob

lets you adjust the output level to the monitors, and adjacent to this a button

switch is provided to let you mute the monitors. There is also a Mono button

that can be very useful when checking audio that will be broadcast (which

may be in mono).

Finally, at the far right of the panel, there is a 1/4” jack socket for headphone

output with an associated volume control knob.

Home View

The Digi 002’s default view is called the Home View. The idea here is that you

should always go back to this ‘home’ view after going outside the ‘home’ view

to other views.

Home view is the Console View with the Pan controls displayed on the Rotary

Encoders and the mixer channel names shown in the Channel Scribble Strips.

This makes sense as the default view because the faders control volume and

the rotary encoders control pan and both of these are positioned on the

control surface just where you would expect volume faders and pan controls

to be on a mixer.

Middle Section

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 52 53

Sin comentarios

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Manual de usuario Pagina 9