M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Manual de usuario descargar pdf (Pagina 29)

The Alt Src Inputs can be used to hook up alternative audio sources such as CD players

or tape decks. These can either be routed directly to the Monitor and Headphone outputs

by pressing the Alt Src to Mon switch or they can be routed to Input channels 7–8 by

pressing the Alt Src to 7–8 switch (in which case inputs 7–8 on the back panel of the Digi

002 are disabled).

If you have a DAT or CD player with S/PDIF digital outputs, you can route these through

the Digi 002’s S/PDIF digital connector to inputs 5–6, allowing you to bring a stereo

digital signal into the Digi 002. When playing audio into the Digi 002 digitally, you will

need to change the sync mode settings to S/PDIF.

Tip

Some digital audio equipment and even some personal computers such as the Mac G5

models feature optical S/PDIF inputs and outputs that you can connect directly to the

Digi 002. This can be useful when you want to play iTunes back through your main

monitors, or to set up iChat on your Mac for video conferencing over the Internet using

your main monitors instead of the Mac’s internal speakers. Don’t forget to set the sync

mode to Word Clock, set the S/PDIF inputs to Optical, and set up the routing for the

S/PDIF inputs to Digi 002 inputs 5–6 first. You can access these settings in Standalone

mode by pressing the F1 Utility button, choosing Preferences by pressing the

corresponding Channel Select button, and pressing the appropriate Channel Select

buttons to access the desired settings.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 70 71

Sin comentarios

M-Audio 37-Key Audio/MIDI Interface and Controller Ozonic Manual de usuario Pagina 29